缅甸中文网--缅甸门户网站

搜索

[贸易类] cnc rebar bending center factory find the agent

[复制链接]
发表于 2020-6-30 17:55:37 | 显示全部楼层 |阅读模式
商家宣传
地区: 仰光省
商家分类: 机械/设备
商家地址: NAWADY
电话号码: 8617616509110
The CNC vertical steel bar bending centeradopts an integrated design. One cycle can bend multiple angles andhigh-strength automatic feeding racks. It realizes a large flexible tighteningmechanism for carrying raw materials, which can ensure the forming accuracy ofparts.  Bending learning is easy to useand can be learned in 1 hour.  The CNCvertical steel bar bending center is controlled by an industrial computer, theprocessing angle is accurate to 1°, and the fixed length is accurate to 1mm.
1. This machine integrates straighteningand cutting. All-in-one hook machine, computer numerical control input, allsteel bars with hooks at both ends can be formed at one time, and the hookangle can be adjusted 90 degrees, 135 degrees and 180 degrees; the hook lengthis 5/7/10  /15cm adjustable; the lengthof the bent steel bar is from the shortest 0.16M to the longest 9M.
    2. In addition to the one-time forming hook, this machine can also beused as a high-performance straightening and cutting machine with astraightening and cutting speed of up to 50 m/min.
    3. This robotic design is very simple to use. A worker who does notunderstand machinery can learn to operate in 10 minutes. The original steel barworker is fully competent.
    4. Simple machine design, low failure rate, easy maintenance and lowmaintenance cost.
    5. Using touch screen PLC programmable controller programming, as longas you enter the product size can be produced, can store 20 batches,automatically straighten the feed, automatically cut off, automatically hook.
    6. Simple design, simple operation, full Chinese menu display, anyonewho knows the straightener can learn immediately and teach in three minutes
山东中济鲁源公司生产的数控钢筋弯曲中心外形尺寸12000MM2180MM1560MM,整机一体化的结构,转运方便,无需固定,全机械传动式结构,噪音小,维修方便,机电一体化设计,控制模板先进,机头移动机构内置于箱体内的集成化设计,可实现双向自动弯曲钢筋,弯曲钢筋最大直径为32.
鲁源弯曲中心机头部分采用8个刹车气缸,更稳定,确保成品精度。整个机身采用锰钢材质焊接,大大增强了机身刚性,不易变形,适用于加工大型号钢筋。减速机内部全部采用磨齿减速机,大大提高了精确度,增强使用寿命。弯曲中心配置多个行走轮,防止有损坏的同时还能继续正常使用,设备行走全部采用伺服电机控制,弯曲角度精准,成型尺寸更精确,速度可调节。控制面板由PLC控制,配有图形输入功能,可加工存储100种图形,加工时调用即可,操作简单易学。
The size of CNC steel bending center producedby Shandong Zhongji Luyuan Company is 12000MM2180MM1560MM. The integratedstructure of the whole machine is convenient to transfer, no need to fix, allmechanical transmission structure, low noise, convenient maintenance,mechanical and electrical integration design, advanced control template,  The integrated design of the machine headmoving mechanism is built into the box, which can realize bidirectionalautomatic bending of the steel bar. The maximum diameter of the bending steelbar is 32.
Thehead part of Luyuan bending center adopts 8 brake cylinders, which is morestable and ensures the accuracy of the finished product.  The entire fuselage is welded with manganesesteel, which greatly enhances the rigidity of the fuselage and is not easy todeform. It is suitable for processing large-scale steel bars.  All gear reducers use grinding gear reducers,which greatly improves the accuracy and enhances the service life.  The bending center is equipped with multiplewalking wheels to prevent damage and still continue to be used normally. Theequipment is controlled by servo motors, the bending angle is accurate, theforming size is more accurate, and the speed can be adjusted.  The control panel is controlled by PLC,equipped with graphics input function, can process and store 100 kinds ofgraphics, just call it during processing, the operation is simple and easy tolearn

回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Copyright © 中缅文化传播(广州)有限公司 All Rights Reserved. Discuz!X3.2   

快速回复 返回顶部 返回列表